Franklin Control Systems

Intelligent Motor Controls

Sign In
Toll Free: 1-800-962-3787
MOTOR AMPERAGE CALCULATOR
To solve for motor amperage, select values below  
This calculator is intended for use in sizing thermal overloads for squirrel cage type motors, running at speeds usual for belted motors and motors with normal torque characteristics. The voltages listed are rated motor voltages. The currents generated by our tool should be accurate for system voltage ranges of 110 to 120, 220 to 240, 440 to 480, and 550 to 600 volts.

These values are given only as a guide ? they may vary depending on the type of motor and manufacturer. Refer to the actual motor nameplate for full-load current values. Motors built for low speeds (1200 rpm and less) or high torques may require more running current and multi-speed motors will have full-load current carrying varying with speed.

       
HP Voltage Phasing Motor Amperage
Single Phase

To obtain full- load currents for 200 and 208 Vac motors, increase corresponding 220 to 240 Vac ratings by 15 and 10 percent, respectively. To obtain full-load currents for 265 and 277 Vac motors, decrease corresponding 220 to 240 Vac ratings by 13 and 17 percent, respectively.  

Automatic recalculation 

Copyright

Copyright 2004 (c)  Cerus, Inc. All rights reserved.

Cerus  hereby authorizes you to copy documents published by Cerus  on the public Internet for personal use only. In consideration of this authorization, you agree that any copy of these documents which you make shall retain all copyright and other proprietary notices contained herein. Cerus does not authorize users to copy any documents or programs used within these documents for the purposes of serving or distributing these documents to third parties via a computer network, intranet or the Internet.

Each individual document published by Cerus on the World Wide Web may contain other proprietary notices and copyright information relating to that individual document

Disclaimer

All tools , programs and information are provided for your personal use. You must verify that the values calculated are accurate and suitable for your application.

These publications and programs are provided "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

Any application or information may include technical inaccuracies or typographical errors. Changes may be periodically made to these publications; these changes will be incorporated in new editions of these publications. The Author may make improvements and/or changes in the products and/or the programs described and used in these publications at any time without notice.

Should any viewer of a Cerus published document respond with information including feedback data, such as questions, comments, suggestions, or the like regarding the content of any such Cerus document, such information shall be deemed to be non-confidential and Cerus shall have no obligation of any kind with respect to such information and shall be free to reproduce, use, disclose and distribute the information to others without limitation. Further, Cerus shall be free to use any ideas, concepts, know-how or techniques contained in such information for any purpose whatsoever including but not limited to developing, manufacturing and marketing products incorporating such information.

Nothing contained herein shall be construed as conferring by implication, estoppels or otherwise any license or right under any patent or trademark of Cerus or any third party. Except as expressly provided above nothing contained herein shall be construed as conferring any license or right under any Cerus copyright.